Welcome to our website TEL: 400-0526-177 Mobile phone: 1582 1189653
Small spray dryer (stainless steel)
Model: OM-1500G

Brand: Oumon


Type: machine stainless steel, laboratory small spray dryer

Small spray dryerProduct description:
Miniature spray drying machine(Small spray dryer/Miniature spray dryer)And it is mainly used in universities, research institutes and food, medicine and chemical enterprise laboratories to produce micro granule powder for all solutions Such as emulsion, suspension has broad applicabilitySuitable for heat sensitive materials such as drying of biological products, bio pesticides, enzyme preparation, high temperature is only because of the sprayed material is mist particle size in spray, so just instant heating, can keep the active material in dry After dry, still maintain its active ingredient, not to be destroyed.
Small spray dryermain features
Imported nozzle, high efficiency.
colourLCDTouch screen parameter display: air inlet temperature/Outlet temperature/Peristaltic pump speed /Air volume/Needle frequency.
Automatic control: one button start, set spray process parameters after the temperature reaches a predetermined temperature, the peristaltic pump to start operation, touch screen animation display, clear display operation process; shutdown just press the stop button, the machine automatically shut down safety.
Manual control: if you need to adjust the process parameters in the experiment process, you can switch to manual state easily. The whole process of experiment is dynamic display (animation) of color touch screen
With a nozzle cleaner (through needle), when the nozzle is blocked, it will be automatically removed, the frequency of the needle can be adjusted automatically.
Shutdown protection function: when the power off, just press the stop button, the machine fan out immediately stop running, ensure that the device will not because of misoperation (forced turn off fan) and heating part burned.
Spray, drying and collection systems are made of transparent, high-quality stainless steel to allow the drying process to take place in a pollution-free environment.
Built in imported oil-free air compressor, the particle size distribution of the spray is normal, the flow is very good, the noise is very low, less than60db.
Two spray structure of fluid spray, the machine is made of high quality stainless steel, compact design, no need for ancillary equipment.
The design of dryness temperature control adopts real-time regulationPIDConstant temperature control technology, accurate temperature control, heating and temperature control accuracy±1℃.
To maintain the purity of the sample, an inlet filter is provided.
The feed quantity can be adjusted by feeding peristaltic pump, and the minimum sample quantity can reach50ml.
Dry powder after drying, its particle size is even,95%Above dry powder in the same particle size range.
For viscous materials, a nozzle cleaner (needle) will be automatically removed when the nozzle is blocked, and the frequency of the needle can be adjusted automatically.
technical parameter:

Maximum water evaporation capacity

1.5-2 (l / h)

Maximum inlet air temperature(°C)

Three hundred

Typical average particle size range(micron)


Parallel flow double fluid nozzle


Heating method

Electric heating

Material for contacting parts of materials

304 / 316lStainless steel

Total power(kw)

Three point eight

Power Supply

220v / all rolling stock required to operate on

Installation space requirement(Open length×wide×highm)


Total weight(kg)

One hundred and ten


Scan QR codeClose